Odlewanie żywicy poliuretanowej na wkładkę na buty
Pobierz najnowszą cenęRodzaj płatności: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF |
Min. Zamówienie: | 1000 Kilogram |
transport: | Ocean |
Porta: | Shanghai |
Rodzaj płatności: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF |
Min. Zamówienie: | 1000 Kilogram |
transport: | Ocean |
Porta: | Shanghai |
Model No: A-2001/B-8580
Marka: Xuchuuan Chemical
Miejsce Pochodzenia: Chiny
Rodzaje: Żywica syntetyczna i tworzywa sztuczne
Application: Insole and low density mid-sole
Characteristic: Good handle, low density and good dimension stability, high elasticity
Appearance: Liquid
Brand: Xuchuan
Code: A-2001/B-8580
Jednostki sprzedaży | : | Kilogram |
Typ pakietu | : | 20 i 225 kg/bęben |
Przykład obrazu | : |
Izocyjanian poliolowy dla średniego
Odlewanie żywicy poliuretanowej na wkładkę na buty
But Sole PU Chemical
Application | shoes insole |
A/B Materials Temperatures (℃) | 40~45/38~42 |
A+C/B Mix ratio (By weight) | 100/74~76 |
Cream Time (s) | 7~9 |
End of Rise Time (s) | 50~60 |
Free Rise Foam Density(g/cm3) | 0.13~0.16 |
Mold Temperature (℃) | 45~55 |
Molded Density (g/cm3) | 0.30~0.40 |
Hardness (Shore C ) | 35~45 |
Tensile strength(MPa) | Tensile strength(MPa) |
Characteristic: Good handle, low density and good dimension stability, high elasticity |
|||||||
Application: Insole and low density mid-sole |
|||||||
Typical properties of PU matrix |
|||||||
Name of products |
Appearance |
Viscosity (mPa·s/40℃) |
Density (g·cm-3/40℃) |
Package(kg) |
/ |
||
A-2001 |
Liquid |
1000~1400 |
1.01~1.02 |
18 |
|||
B-8580 |
Yellowish transparent liquid or waxy |
600~1000 |
1.08~1.2 |
20 |
|||
Materials preheat |
|||||||
A-2001: preheated at 50~60℃ for 8~10 hours. |
|||||||
B-8580: preheated at 50~60℃ for 8~12 hours. |
|||||||
Typical processing parameters & Reaction parameter |
|||||||
Items |
A/B Materials Temperatures |
A+C/B Mix ratio |
Cream Time (s) |
End of Rise Time (s) |
Free Rise Foam Density(g/cm3) |
Mold Temperature |
Demold Time(min) |
Parameter |
40~45/38~42 |
100/74~76 |
7~9 |
50~60 |
0.13~0.16 |
45~55 |
4~5 |
The adding content of C-2 should be 300g±20g/18kg. |
|||||||
The adding content of water should be 0~90g/18kg according to the reality. |
|||||||
Physical properties |
|||||||
Items |
Molded Density (g/cm3) |
Hardness |
Tensile strength(MPa) |
Elongation (%) |
Tear Strength |
/ |
|
Physical properties |
0.30~0.40 |
35~45 |
4.0~6.0 |
300~380 |
18~26 |
||
Demold time may be prolonged with the increase of sole thickness |
|||||||
These physical data are acquired by testing a sample of 6mm thick. |
|||||||
Data listed above are just for reference. The detail data are subjected to practical production. If other requests for physical properties, please contact us. |
Xuchuuan Chemical, założony w 2007 r., Kapitał zarejestrowany przez spółkę wynosi 500 mln RMB. Główne produkty to poliestrowy poliol, żywica poliuretanowa do butów, wodoodporne i bez rozpuszczalnikowe żywice poliuretanowe do sztucznej skóry, klejów wiążących poliuretan i klejów poliuretanu.
Teraz Xuchuan ma 4 nowoczesne bazy produkcyjne, zdolności produkcyjne osiągnęły 630 000 ton rocznie, produkty eksportowane do 32 krajów i regionów na świecie.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.